Note: The ssh tunnel must already be setup for this to work.Ĭonnect to port 1 on a 48 port Console Server at IP address 10.111.254.1, using RFC2217: "-P 22222" will attempt to connect to local TCP port 22222. To connect via a secure ssh tunnel, use the '-P' parameter as part of "opts", and give the TCP port number used for the local end of the tunnel. Opts -> per-port interface options (optional) Type -> Server type : rfc2217 or socket (raw TCP) Physport -> Physical port number on Console Server Rasname -> Console Server host name or IP address Rastype -> Console Server type (cm4008 or CM4116 or CM4148) usr/local/sbin/portshare-serial-client startīelow are some examples showing the virtual port configuration and using a remote console serial port as a local tty port on the Linux host:ĭevname:cmtype:cmname:physport:type:options Configure the devices by editing /etc/portshare-devices (sample configurations and the format is shown below).Note that the `-prefix=' option is ignored by configure Build and install the package (as root):.To install the Opengear PortShare serial client:.ensure the console server IP configuration is ok and that you can access the unit (ping, telnet.) and configure the console server serial port to RAW or RFC2217 mode You first need to setup the console server and attach and configure the remote serial port device i.e.The opengear-serial-client creates a pseudo tty port, connects the serial application to the pseudo tty port, receives data from the pseudo tty port, transmits it to the console server through network and receives data from the console server through network and transmits it to the pseudo-tty port. This PortShare serial port redirector allows you to use a serial device connected to the remote console server as if it were connected to your local serial port. This utility can be freely downloaded from. The opengear-serial-client as an open source utility for Linux, AIX, HPUX, SCO, Solaris and UnixWare. The PortShare driver for Linux maps the console server serial port to a host tty port.
0 kommentar(er)
